Includes: WCU Hand Unit, CForce Plus Motor, CForce Mini Motor, 5 x Pre-Marked Rings, 2 x Blank Rings, 4 x LBus Cables, 3 x Sony NP batteries, NP battery charger, Monitor bracket, L-Bracket, Lanyard, Case,
Optional UMC-4 Controller w/ 2x Arri to DTap, Choices of: R/S Cable red epic cable, Alexa Mini EXT cable (10pin-7pin lemo)
SXU-1 | AMC-1
Single Axis Lens Control
For Focus, Iris, or Zoom
Backlit Control Knob
Remote REC and Tally
Includes: SXU Hand Unit, CForce Plus Motor, 1 x Blank Rings, 2 x LBus Cables, 3 x Sony NP batteries, NP battery charger, L-Bracket, Lanyard, AMC-1, Case, 2x Arri to DTap, Choices of: R/S Cable red epic cable, Alexa Mini EXT cable, LANC RS
RT Motion Cntrl 1 Follow Focus
Latitude MDR-M Receiver
MOTR.X Super-Speed Brushless Lens Motor
CTRL.1 Wireless Lens Controller
1 x Lens Mapped Marking Disks
RT Motion MK3.1
Includes: Hand unit transmitter, receiver, up to 3 x digital motors, batteries and charger
The RTMOTION MK3.1 Lens Control system is optimized for high-end Wireless and Wired remote control of Cinema and Still camera lenses. The range is specifically designed to enable a low-cost entry point (single motor), with a broad expansion capability.
World's smallest and lightest lens control receiver - 3 motor control as standard. OLED menu screen. Unique interference-free FHSS (frequency hopping spread spectrum) wireless. Adjustable wireless range up to 1,500 meters line-of-sight with 42 channels. Automatic and Manual (softstop) calibration. Adjustable motor response for silky smooth to quick and sharp moves. Unique automatic calibration and torque control to protect lenses. Simultaneous 4 Axis control as standard (Knob, Slider, A and B), 6 with optional force-joystick (X and Y). No noticeable latency, 2ms. Integral protected antennas to help prevent damage. Run-stop support for Arri, Alexa, Red EPIC, Red One, Sony F55, Phantom Flex, LANC and Black Magic etc. Full 16bit digital transmission. Micro USB ports for firmware updates. Auxiliary port for trigger, digital serial and analogue communication. FCC/IC/CE Certified wireless, World-wide licence-free 2.4 GHz. Precision machined from aerospace grade aluminium billet.
Cine Tape Measure
Kit Includes: Main horns Horn lens shade Noga arm Cinetape measure control Arri Fisher 12v power cable 12v xlr power cable panavision power cable Arri 24v cable and horn>screen interface cable P-tap power cable backup horn>screen interface cable 4 pin xlr male power cable to cinetape power
Arri OCU-1 Operator Control Unit
Single-Axis Focus/Iris/Zoom Control
Requires Use of WCU-4 Wireless Control
Enables Operator to Assume Lens Control
Returns Control to Optional WCU-4
Preston Micro Force
Includes: Preston MicroForce V+F2 w/ pan arm clamp bracket (includes specific power cable)
Available Cable: D-tap Y cable for M26T, 3-pin Lemo Y cable for M26T, Fuji Cabrio cable
The OConnor Cine Follow Focus One eliminates juggling of separate bridge plates, and attaches onto either 15mm or 19mm studio rod systems. The operator can switch between the 2 standards comfortably, and its low clearance enables the follow focus to work with large diameter lenses such as the Angenieux 24-290mm, Red 18-85mm, Fujinon 18-85mm, and Fujinon 75-400mm. The follow focus is compatible with accessories such as whips, gears, and cranks.
Numerous mounting options for specialty setups are possible as the main bridge slides independent of the support bridge dovetail. The swing arm of the Cine Follow Focus One can be mounted on either side of the bridge for better integration with all lens and matte box configurations. The horizontal sliding makes it easy for the user to adjust the focus drive gear for a clear line of sight. Eccentric adjustments on handwheels allow flexible positioning, and the custom-cut, low-runout gears (Minimal Backlash Mechanism) ensure high accuracy.
Eliminates juggling of separate bridge plates Clamps easily onto either 15mm or 19mm studio rod systems Switches efficiently between the 2 standards Low clearance - helps it to work with large diameter lenses such as the Angenieux 24-290mm, Red 18-85mm, Fujinon 18-85mm, and Fujinon 75-400mm Compatible with accessories like whips, gears, and cranks Offers numerous mounting options for specialty setups as the main bridge slides independent of the support bridge dovetail Mounts swing arm on either side of bridge for better integration with all lens and matte box configurations Horizontal sliding adjustment - easily adjusts the focus drive gear for a clear line of sight Allows flexible positioning with the help of eccentric adjustments on handwheels Minimal Backlash Mechanism - custom-cut, low-runout gears ensure high accuracy Constructed of lightweight, durable black anodized aluminum