Preston Fiz HU3 MDR2 Rubber grip + metal cover 6x marking rings 3x bushings 2x DM2 motors 1x DM1 motor Brackets for rod mounting motors x3 2x ptap power cables for MDR 2 2x Straight to Straight motor cables 2x Straight to right angle motor cables 4x batteries (Sony) 1x dual charger 3 pin to mdr 2 Y cable to run stop from 3 pin RS Microforce Microforce cable to Hu3 Mircroforce bracket to attach to HU3
Wireless Handheld F/I/Z Controller
For ARRI ALEXA Mini/Plus/Studio & AMIRA
For UMC-4/SMC-1/EMC-1/AMC-1 Controllers
Vibrating Markers, Backlit Focus Knob
Includes Marking Disk, Strap & Lanyard
AMC-1 Option available for Non-Alexa Mini Setups
Includes: WCU Hand Unit, CForce Plus Motor, CForce Mini Motor, 5 x Pre-Marked Rings, 2 x Blank Rings, 4 x LBus Cables, 3 x Sony NP batteries, NP battery charger, Monitor bracket, L-Bracket, Lanyard, Case, 2x Arri to DTap, Choices of: R/S Cable red epic cable, Alexa Mini EXT cable (10pin-7pin lemo)
(Add motor +$75 )
Cine Tape Measure
Kit Includes: Main horns Horn lens shade Noga arm Cinetape measure control Arri Fisher 12v power cable 12v xlr power cable panavision power cable Arri 24v cable and horn>screen interface cable P-tap power cable backup horn>screen interface cable 4 pin xlr male power cable to cinetape power
RT Motion MK3.1
Includes: Hand unit transmitter, receiver, up to 3 x digital motors, batteries and charger
The RTMOTION MK3.1 Lens Control system is optimized for high-end Wireless and Wired remote control of Cinema and Still camera lenses. The range is specifically designed to enable a low-cost entry point (single motor), with a broad expansion capability.
World's smallest and lightest lens control receiver - 3 motor control as standard. OLED menu screen. Unique interference-free FHSS (frequency hopping spread spectrum) wireless. Adjustable wireless range up to 1,500 meters line-of-sight with 42 channels. Automatic and Manual (softstop) calibration. Adjustable motor response for silky smooth to quick and sharp moves. Unique automatic calibration and torque control to protect lenses. Simultaneous 4 Axis control as standard (Knob, Slider, A and B), 6 with optional force-joystick (X and Y). No noticeable latency, 2ms. Integral protected antennas to help prevent damage. Run-stop support for Arri, Alexa, Red EPIC, Red One, Sony F55, Phantom Flex, LANC and Black Magic etc. Full 16bit digital transmission. Micro USB ports for firmware updates. Auxiliary port for trigger, digital serial and analogue communication. FCC/IC/CE Certified wireless, World-wide licence-free 2.4 GHz. Precision machined from aerospace grade aluminium billet.
Anton Bauer CINE VCLX Battery
560Wh NiMH Battery
Compatible with CINE VCLX Charger
Dual Simultaneous Outputs
Two 4-Pin XLR (14.4v/20 amps)
Preston Micro Force
Includes: Preston MicroForce V+F2 w/ pan arm clamp bracket (includes specific power cable)
Available Cable: D-tap Y cable for M26T, 3-pin Lemo Y cable for M26T, Fuji Cabrio cable
Bright Tangerine VIV
2 Rotating 4x5.65" Filter Stages
1 Fixed 4x5.65" Filter Stage
150mm Clamp-On Diameter
Includes: 4x5.6” Matte Box 3-Stage, Top & side flags, 15mm LW swing-arm w/ 19mm adapter, 5 Hard Mattes, Choice of reduction rings: 114m, 104mm, 100mm, 95mm, 87mm, 85mm, and 80mm.
The OConnor Cine Follow Focus One eliminates juggling of separate bridge plates, and attaches onto either 15mm or 19mm studio rod systems. The operator can switch between the 2 standards comfortably, and its low clearance enables the follow focus to work with large diameter lenses such as the Angenieux 24-290mm, Red 18-85mm, Fujinon 18-85mm, and Fujinon 75-400mm. The follow focus is compatible with accessories such as whips, gears, and cranks.
Numerous mounting options for specialty setups are possible as the main bridge slides independent of the support bridge dovetail. The swing arm of the Cine Follow Focus One can be mounted on either side of the bridge for better integration with all lens and matte box configurations. The horizontal sliding makes it easy for the user to adjust the focus drive gear for a clear line of sight. Eccentric adjustments on handwheels allow flexible positioning, and the custom-cut, low-runout gears (Minimal Backlash Mechanism) ensure high accuracy.
Eliminates juggling of separate bridge plates Clamps easily onto either 15mm or 19mm studio rod systems Switches efficiently between the 2 standards Low clearance - helps it to work with large diameter lenses such as the Angenieux 24-290mm, Red 18-85mm, Fujinon 18-85mm, and Fujinon 75-400mm Compatible with accessories like whips, gears, and cranks Offers numerous mounting options for specialty setups as the main bridge slides independent of the support bridge dovetail Mounts swing arm on either side of bridge for better integration with all lens and matte box configurations Horizontal sliding adjustment - easily adjusts the focus drive gear for a clear line of sight Allows flexible positioning with the help of eccentric adjustments on handwheels Minimal Backlash Mechanism - custom-cut, low-runout gears ensure high accuracy Constructed of lightweight, durable black anodized aluminum
Bright Tangerine Misfit
Misfit Carbon Fiber Matte Box Core
114mm Clamp Lens Attachment
Two 4 x 5.65" Horizontal Filter Trays
Integrated 2-to-3-Stage Adjustability
Tiffen 138mm and 4 x 5.65" Polarizers
Includes: 4x5.6” Matte Box 3-Stage, Top flag, 5 Hard Mattes, and choice of clamp back (143mm, 114mm, 110mm, 104mm, 95mm, 80mm)
*Additional Clamp Backs are a $10 charge*
Includes: Mattebox, top “French” flag, Side flags, 2 - 4x5 trays, 2 - 4x4 trays, 138mm filter bellows, various sized donuts
The OConnor O-BOX WM Set (15mm LWS) is a package that includes the O-Box WM matte box, a wide mini sunshade, top flag, two 4 x 4" filter frames, two 4 x 5.65" filter frames, and a 15mm LWS rod bracket.
You are provided with the sunshade that is manufactured using OConnor's rugged composite that provides augmented rigidity and impact resistance resulting in reduced sunshade replacements in professional production environments. A top flag fitting into the integrated top flag mounting bracket shields the lens from excessive sunlight.
Also included are two 4 x 4" and two 4 x 5.65" filter frames that act as fixed as well as 360° rotatable filter holders allowing the matte box to accept two filters. You are also provided with a rod interface for the 15mm LWS standard.
Includes the O-Box WM matte box, a wide mini sunshade, top flag, two 4 x 4" filter frames, two 4 x 5.65" filter frames, and a 15mm LWS rod bracket Wide mini sunshade - offers augmented rigidity and impact resistance resulting in reduced sunshade replacements in professional production environments Shields the lens from excessive sunlight via top flag fitting into the integrated top flag mounting bracket Includes two 4 x 4" and two 4 x 5.65" filter frames that act as fixed as well as 360° rotatable filter holders allowing the matte box to accept two filters Provides rod interface for the 15mm LWS standard
Add a Gold mount or V-mount battery plate to your 15mm or 19mm rail system.
Includes: Choose of battery plate and 15mm or 19mm clamp adapter
IDX PowerCube 98wh
IDX Endura E-7S Slim 68wh
GMP Li160S 160wh
Red Brick 153wh
RedRock Micro Blue FF
Includes: Follow focus, crank, and whip
The Redrock microFollowFocus Black with a 0.8 film pitch drive gear allows you to pull focus of still and cinema lenses. The follow focus includes a backlash dial that enhances the precision of focusing. The integrated hard stops with easy begin/end setups enable fast repeatable racking between 2 focus points, thus achieving perfect focus on lenses without hard stops. A moveable focus indicator allows you to pull focus from any place on the camera while maintaining view of focus indicator and focus wheel. The focus indicator has been redesigned for enhanced durability. The 3D marking disk allows you to view your focus marks from many angles. You can use the marking disc in low-light conditions using an optional flare, which offers a glow and illuminates the marking disc. The quick release clamp can be easily attached or detached from the set up without disturbing the other rail mounted gears. Custom-designed gears and gearbox offer slack-free performance for foolproof focus pulling. A flippable gearbox adjusts the drive gear front and rear and is compatible with lenses of any size. An industry-standard, all-metal machined accessory port enables you to add focus whip or speed crank to the focusing system. A Kung Fu rubberized handgrip prevents hand-slips and ensures stable shooting. Made in America, the microFollowFocus Black has an all-aluminum construction
0.8 film pitch drive gear, with options for Fujinon and Canon drive gears Allows precise focusing of still and cinema lenses Includes a backlash dial for enhanced focusing of lenses Integrated hard stops with easy begin/end setups enable fast repeatable racking between two focus points, thus achieving perfect focus on lenses without hard stops - can be used with Canon and Nikon lenses A moveable focus indicator allows you to pull focus from any place on the camera while maintaining view of focus indicator and focus wheel 3D marking disk - allows you to view your focus marks from many angles You can use the marking disc in low-light conditions using an optional flare, which offers a glow and illuminates the marking disc Custom-designed gears and gearbox offer slack-free performance Flippable gearbox - adjusts the drive gear front and rear and is compatible with lenses of any size Industry-standard, all-metal machined accessory port - you can add focus whip or speed crank to the focusing system Kung Fu rubberized handgrip - prevents hand-slips and ensures stable shooting Allows you to attach a second side focus wheel (not included) for pulling focus from the other side of your lens Aluminum construction